1st STEPS WITH A SENSOR
Starting-up device with an industrial casing with a magnet Once the product has been configured and its assembly has been finalized, the product is ready ...
Mon, 18 May, 2020 at 4:45 PM
Battery clipped on a support When the low battery indicator is activated (indicator in the frame or flashing of the red LED), it is possible to change the...
Mon, 18 May, 2020 at 4:45 PM
I. PRODUCT WITH AN IP67 INDUSTRIAL CASING Correct positioning of the product transceivers There are two key rules for optimizing radio ranges. The...
Mon, 18 May, 2020 at 4:46 PM
SMALL IP67 CASING Open the case using the cable gland CAUTION : do not pull on any wire take out the card or enter it in the box following th...
Mon, 18 May, 2020 at 4:46 PM
The device configuration using the micro-USB port can now be done in two ways: using the IoT Configurator (application on the user-friendly interface) or b...
Mon, 18 May, 2020 at 4:47 PM
To perform the provisionning of the transmitter on the operator's backend you should have the information, more specifically the keys* corresponding to...
Tue, 2 Mar, 2021 at 4:28 PM
To find the ID of a device with an industrial or a smart building casing All the adeunis products have a label with the information, described here under, ...
Mon, 18 May, 2020 at 4:39 PM
To start up the device* with an industrial casing, it is mandatory to use a magnet with a force of 2kg or more. The shape of the magnet does not matter. ...
Mon, 18 May, 2020 at 4:39 PM
To make the provisioning of a sensor on the Sigfox Backend*, you need information linked to the concerned product. This information is available via ad...
Tue, 2 Mar, 2021 at 4:28 PM
A SUPPRIMER For all the adeunis sensors, an excel file is sent by our sales administration just after the shipping of the products. NB: If you have boug...
Tue, 2 Mar, 2021 at 4:28 PM