How to change a sensor battery

Battery clipped on a support 

When the low battery indicator is activated (indicator in the frame or flashing of the red LED), it is possible to change the internal battery of the unit.

It is important to use a battery of the same reference.

Procedure to change the battery: 

1. Open the case 
2. Remove the battery and replace it with the new one respecting the polarity as indicated on the electronic card and the reference of the battery 
3. Close the unit 
4. Restart the product with the magnet as for a first start After this procedure the product will behave as during a first start. 

Battery pack 

When the low battery indicator is activated (indicator in the frame or flashing red LED), change the internal battery of the case.

It is important to keep the same reference. 

1. Open the case 
2. Disconnect the wire from the existing battery, remove it from its holder, replace it with the new one, remembering to connect the wire. 
3. Close the case 
4. Restart the product with the magnet as for a first start After this procedure, the product will react as if it were the initial start-up.

For any other questions related to this subject or any information not covered in the FAQ please contact our support service by opening a ticket: https://adeunis.freshdesk.com/fr/support/tickets/new