How do I detect a lowbat on my PULSE?

Modified on Mon, 16 Nov, 2020 at 10:17 AM

The presence of the "LowBat" bit is visible in the second byte of each frame transmitted by the sensor.

This byte is called "status byte" and is explained in chapter 1.4 of the Technical Reference Manual (TRM).

The presence of a "Lowbat" will be represented by a 2 or 3 in the second digit of the status byte.

For any other question or if the information you searched is missing in the FAQ, please, contact our technical support through the ticketing platform: https://adeunis.freshdesk.com/en/support/tickets/new