To which terminals should I wire me for the impulse?

The first thing to do is to check whether the pulse output of the meter or meter head is polarised (sometimes for some electricity meters).

• If the impulse output is polarized: connect the "+" wire to the IMP terminal of the PULSE and the "-" wire to the GND terminal of the PULSE. 
• If the pulse output is not polarised: connect the wires indifferently to the IMP and GND terminals of the PULSE. 

For 2-wire, 3-wire (2-wire + fraud) or 5-wire output, refer to the USER GUIDE of the PULSE. 

Mounting the meters on the screw terminals:

For any other question or if the information you searched is missing in the FAQ, please, contact our technical support through the ticketing platform: https://adeunis.freshdesk.com/en/support/tickets/new