PULSE / PULSE ATEX

How do I set up history in my product?
In the PULSE sensor (APP version 2.0.0 and later) it is possible to set up historicalization.  Historicalization allows data to be collected at differen...
Mon, 16 Nov, 2020 at 10:17 AM
How do I set up redundancy in my product?
In the PULSE sensor (APP version 2.0.0 and later) redundancy can be set.  Redundancy is a mechanism to repeat data from one frame to another. Thus, in c...
Mon, 16 Nov, 2020 at 10:17 AM
Why do I receive a 46 frame on some of my receivers and a 5a or 5b frame on others?
Frame 46 is the periodic data frame WITHOUT logging and frames 5A and 5B are the periodic frames with logging of each of the meter channels.  The recept...
Mon, 16 Nov, 2020 at 10:17 AM
How do I detect a lowbat on my PULSE?
The presence of the "LowBat" bit is visible in the second byte of each frame transmitted by the sensor.  This byte is called "status byte...
Mon, 16 Nov, 2020 at 10:17 AM
My PULSE sends packets of frames irregularly, what happens?
If you notice the appearance of irregular transmissions (transmission stop, then after a few hours reboot of the device with transmission of the 0x10 and 0x...
Mon, 16 Nov, 2020 at 10:17 AM
What is the purpose of the "flow calculation period" register?
The "Flow calculation period" parameter is only useful when using the PULSE in:  OVERFLOW MONITORING: transmission of an alarm frame if the meas...
Mon, 16 Nov, 2020 at 10:17 AM