REPEATER SIGFOX
When a sensor is not repeated by the REPEATER, several options are possible. It can come from a WhiteList not correctly configured, a wrong position of t...
Tue, 17 Sep, 2019 at 11:47 AM
Yes, since the 2.02 firmware version of the REPEATER, it is possible to send downlinks to the REPEATER. With those Downlinks, you can : change the RE...
Tue, 17 Sep, 2019 at 11:50 AM
The ID of the REPEATER is mentioned on the label bonded on the case. The PAC (Porting Authorization Code) and the End-product-certificate are ...
Tue, 17 Sep, 2019 at 11:48 AM
The REPEATER, as all the products, must respect the radio regulations and so the Duty Cycle when it repeats frames. If too many frames are sent by the produ...
Tue, 17 Sep, 2019 at 11:50 AM
Yes. Even if the REPEATER can work without being declared on the network, we advise you to declare your REPEATER on the Sigfox Backend. The declaration...
Tue, 17 Sep, 2019 at 11:48 AM
The REPEATER was not designed to be installed in series. A REPEATER repeat message from a sensor to the Sigfox network and so will interpret messages f...
Tue, 17 Sep, 2019 at 11:48 AM
Yes, the REPEATER does not distinguish a Sigfox product to another. It has been developed for all the products using Sigfox protocol operating on the RC1 zo...
Tue, 17 Sep, 2019 at 11:49 AM
Duty Cycle respected by the REPEATER The REPEATER, as all the products, must respect the radio regulations and so the Duty Cycle when it repeats frames...
Tue, 17 Sep, 2019 at 11:50 AM
No, the reference transmitter does not need to be declared on Sigfox Backend to work. For information, the reference transmitter is available in the In...
Tue, 17 Sep, 2019 at 11:49 AM
Use a compatible wire If your REPEATER is not recognized by the app, verify that you are using a micro-USB wire that enable data transmission (OTG)....
Tue, 17 Sep, 2019 at 11:50 AM