FTD

The temperature displayed does not correspond to the ambient temperature
Because the temperature sensor is inside the housing, there may be a difference of a few degrees between the displayed temperature and the actual room te...
Mon, 18 May, 2020 at 5:13 PM
The FTD does not display a GPS fix after it has been turned on for several minutes
If after several minutes of powering on, the FTD does not display a GPS fix : The accelerometer is deactivated by default, to activate it -> via IoT ...
Mon, 18 May, 2020 at 5:14 PM
Can the ARF8123AA EU863-870 FTD ARF8123AA parameter setting be modified to operate on a RU864-870 or IN865-867 network?
NO, it is not possible to modify the mandatory operating frequencies set for the EU863-870 zone.
Mon, 18 May, 2020 at 5:15 PM
FTD does not receive ACK (NEW version)
The ACK is disabled by default, to enable it: connect to the IoT Configurator,  from the Application Configuration menu,  scroll down the communica...
Mon, 18 May, 2020 at 5:15 PM
My FTD got stuck in command mode and won't shut down
The FTD was disconnected before receiving an ATO command or a disconnect request on the IoT Configurator.  If the FTD does not switch off with the On/Off b...
Mon, 18 May, 2020 at 5:16 PM